MS 8230 MIDI ELEKTRO
The MIDI series of MS 8230 planters has: stainless steel fertilizer tank with a capacity of over 1300 litres, suitable for auger loading, centralized adjustment of the distributed quantities, pneumatic transport system on all rows and the patented EASY-SET system.
The electric transmission system guarantees instant seeding when restarting and eliminates slippage; furthermore, it is possible to vary the seeding rate along the direction of travel (not between rows) and automatically interrupt the seeding of each row. The absence of a dedicated battery for the electric motors eliminates the need for specific maintenance.
-
Sowing element type 8000-ELEKTRO
-
New cast arm with Quick-Set adjustment system
-
1" V-shaped compression wheels
-
Additional blower
-
Pneumatic volumetric fertiliser metering unit
-
Continuous changeover variator for fertiliser
-
Double frame with folding wings and hydraulic Easy-Set device
-
Track width 2.54 m (6 rows) to 3.20 m (12 rows)
-
Safety device against accidental opening of the frame
-
PTO 750 rpm (for machines up to 7 rows)[1];
-
P.t.o. 1000 rpm (for machines over 7 rows)[1].
-
PTO shaft with free wheel 1" 3/8 Z6-Z6 (length 718 mm)
-
Vacuum gauge
-
Electric drive with ISOBUS system and engine ECU for single row (monitor not included)
-
Maintenance-free tractor-independent electrical system
-
Automatic hydraulic row marker (specify whether centre or wheel marker)
-
One set of sowing discs (specify number of holes and diameter)
-
One set of inter-row rings (specify inter-row size)
-
Flow control diaphragm and small and large seed ejectors (each row)
-
Conveyor for collecting residual seeds
-
Element lifting lever
NOTE:
The tractor needs a rear ISOBUS socket*.
At least 2 hydraulic distributors required on the tractor
Technical features
- 6X45-->75 cm
- 7x50--> 6x75 cm
- 7X50 --> 6X75/80 cm
- 8X45/50-->75 cm(*)
- 8X45/50-->80 cm(*)
- 9X45-->8X80 cm (*)
- 11X45/50 --> 8X70/75 cm (*)
- 12X45/50-->8X75/80 cm (*)
N° ROWS | 6 |
ROW SPACING | 45-->75 cm |
TOOL BAR | 254/400 cm |
WEIGHT FERTI | 1570 Kg |
WEIGHT FERTI + MICRO | 1600 Kg |
POWER REQUIRED | 100 hp |
SEED CAPACITY | 300 L |
MICRO CAPACITY | 75 L |
FERTIL CAPACITY | 1000 L |
N° ROWS | 7-->6 |
ROW SPACING | 50-->75 cm |
TOOL BAR | 254/400 cm |
WEIGHT FERTI | 1690 Kg |
WEIGHT FERTI + MICRO | 1770 Kg |
POWER REQUIRED | 110 hp |
SEED CAPACITY | 350 L |
MICRO CAPACITY | 88 L |
FERTIL CAPACITY | 1000 L |
N° ROWS | 7 --> 6 |
ROW SPACING | 50-->75/80 cm |
TOOL BAR | 300/445 cm |
WEIGHT FERTI | 1710 Kg |
WEIGHT FERTI + MICRO | 1790 Kg |
POWER REQUIRED | 110 hp |
SEED CAPACITY | 350 L |
MICRO CAPACITY | 88 L |
FERTIL CAPACITY | 1280 L |
N° ROWS | 8 |
ROW SPACING |
45/50-->75 cm
|
TOOL BAR | 300/590 cm |
WEIGHT FERTI | 1850 Kg |
WEIGHT FERTI + MICRO | 1930 Kg |
POWER REQUIRED | 130 hp |
SEED CAPACITY | 400 L |
MICRO CAPACITY | 100 L |
FERTIL CAPACITY | 1280 L |
(*): Removable distal portions of the toolframe
N° ROWS | 8 |
ROW SPACING |
45/50-->80 cm
|
TOOL BAR | 320/610 cm |
WEIGHT FERTI | 1900 Kg |
WEIGHT FERTI+MICRO |
1940 Kg
|
POWER REQUIRED | 130 hp |
SEED CAPACITY | 400 L |
MICRO CAPACITY | 100 L |
FERTIL CAPACITY | 1280 L |
(*): Removable distal portions of the toolframe
N° ROWS | 9 --> 8 |
ROW SPACING |
45-->80 cm
|
TOOL BAR | 320/610 cm |
WEIGHT FERTI | 1970 Kg |
WEIGHT FERTI+MICRO |
2090 Kg
|
POWER REQUIRED | 130 hp |
SEED CAPACITY | 450 L |
MICRO CAPACITY | 113 L |
FERTIL CAPACITY | 1280 L |
(*): Removable distal portions of the toolframe
N° ROWS | 11 --> 8 |
ROW SPACING |
45/50-->70/75 cm
|
TOOL BAR | 320/610 cm |
WEIGHT FERTI | 2100 Kg |
WEIGHT FERTI+MICRO | 2290 Kg |
POWER REQUIRED | 140 hp |
SEED CAPACITY | 550 L |
MICRO CAPACITY | 138 L |
FERTIL CAPACITY | 1280 L |
(*): Removable distal portions of the toolframe
N° ROWS | 12 --> 8 |
ROW SPACING |
45/50-->75/80 cm
|
TOOL BAR | 320/610 cm |
WEIGHT FERTI | 2220 Kg |
WEIGHT FERTI+MICRO | 2440 Kg |
POWER REQUIRED | 140 hp |
SEED CAPACITY | 600 L |
MICRO CAPACITY | 150 L |
FERTIL CAPACITY | 1280 L |
(*): Removable distal portions of the toolframe