MS 8230 ELEKTRO PRO
The PRO series of MS 8230 seed drills has: fertilizer tank of over 1300 litres, suitable for loading with auger, centralized regulation of the distributed quantities, pneumatic transport system on all rows and patented EASY-SET system.
The electric system of the transmission guarantees instantaneous seeding during restarts and cancellation of slippage. It is possible to automatically adjust the seeding rate based on GPS coordinates (uniform rate across the working width) and to interrupt each single planting unit. The absence of a battery dedicated to the electrical system eliminates the need for specific maintenance.
The electric system of the transmission guarantees instantaneous seeding during restarts and cancellation of slippage. It is possible to automatically adjust the seeding rate based on GPS coordinates (uniform rate across the working width) and to interrupt each single planting unit. The absence of a battery dedicated to the electrical system eliminates the need for specific maintenance.
- 8000-RS planting unit
- “V” shaped 1” rubber closing wheels
- Additional fan
- Pneumatic volumetric metering unit, for fertilizer
- Step-less speed gearbox, for fertilizer
- Hydraulic folding Easy-Set tool bar
- Transport width from 2.54 m (6 rows) to 3.20 m (12 rows)
- Safety device against accidental opening of the tool bar
- 3 point hitch
- New cast-iron wheel support with Quick-Set system
- P.T.O 750 rpm
- Cardan shaft with free wheel 1” 3/8 Z6-Z6
- Vacuum meter
- ISOBUS compliant* electric motor ECU and electric transmission on each row (virtual terminal not included)
- Maintenance-free, tractor independent power supply; no battery required
- Hydraulic automatic row marker
- Centralized gearbox 21 ratios
- One set of seed plates
- One set of Easy-Set spacing rods
- Partitioning wall for small seeds and dropping device
- Seed emptying collector
- Front drive wheels: 2 of 23x10.50-12 (230 mm)
NOTE: requires 2 hydraulic connections to the tractor
Technical features
- 6X45-->75 cm
- 7x50--> 6x75 cm
- 7X50 --> 6X75/80 cm
- 8X45/50-->75 cm
- 8X45/50-->75 cm(*)
- 8X45/50-->80 cm
- 8X45/50-->80 cm(*)
- 9X45-->8X80 cm
- 11X45/50 --> 8X70/75 cm
- 12X45/50-->8X75/80 cm
| N° ROWS | 6 |
| ROW SPACING | 45-->75 cm |
| TOOL BAR | 254/400 cm |
| WEIGHT FERTI | 1570 Kg |
| WEIGHT FERTI + MICRO | 1600 Kg |
| POWER REQUIRED | 100 hp |
| SEED CAPACITY | 300 L |
| MICRO CAPACITY | 75 L |
| FERTIL CAPACITY | 1x1150 L |
| N° ROWS | 7-->6 |
| ROW SPACING | 50-->75 cm |
| TOOL BAR | 254/400 cm |
| WEIGHT FERTI | 1690 Kg |
| WEIGHT FERTI + MICRO | 1770 Kg |
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 350 L |
| MICRO CAPACITY | 88 L |
| FERTIL CAPACITY | 1x1150 L |
| N° ROWS | 7 --> 6 |
| ROW SPACING | 50-->75/80 cm |
| TOOL BAR | 300/445 cm |
| WEIGHT FERTI | 1710 Kg |
| WEIGHT FERTI + MICRO | 1790 Kg |
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 350 L |
| MICRO CAPACITY | 88 L |
| FERTIL CAPACITY | 1x1360 L |
| N° ROWS | 8 |
| ROW SPACING |
45/50-->75 cm
|
| TOOL BAR | 300/590 cm |
| WEIGHT FERTI | 1850 Kg |
| WEIGHT FERTI + MICRO | 1930 Kg |
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 400 L |
| MICRO CAPACITY | 100 L |
| FERTIL CAPACITY | 1x1360 L |
| N° ROWS | 8 |
| ROW SPACING |
45/50-->75 cm
|
| TOOL BAR | 300/590 cm |
| WEIGHT BASE | 1890 Kg |
| WEIGHT FERTIL | 1970 Kg |
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 400 L |
| MICRO CAPACITY | 100 L |
| FERTIL CAPACITY | 1x1360 L |
(*): Removable distal portions of the toolframe.
| N° ROWS | 8 |
| ROW SPACING |
45/50-->80 cm
|
| TOOL BAR | 320/610 cm |
| WEIGHT FERTI | 18960 Kg |
| WEIGHT FERTI + MICRO |
1940 Kg
|
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 400 L |
| MICRO CAPACITY | 100 L |
| FERTIL CAPACITY | 1x1360 L |
| N° ROWS | 8 |
| ROW SPACING |
45/50-->80 cm
|
| TOOL BAR | 320/610 cm |
| WEIGHT BASE | 1900 Kg |
| WEIGHT FERTIL |
1980 Kg
|
| POWER REQUIRED | 110 hp |
| SEED CAPACITY | 400 L |
| MICRO CAPACITY | 100 L |
| FERTIL CAPACITY | 1x1360 L |
(*): Removable distal portions of the toolframe
| N° ROWS | 9 --> 8 |
| ROW SPACING |
45-->80 cm
|
| TOOL BAR | 320/610 cm |
| WEIGHT BASE | 1970 Kg |
| WEIGHT FERTIL |
2090 Kg
|
| POWER REQUIRED | 120 hp |
| SEED CAPACITY | 450 L |
| MICRO CAPACITY | 113 L |
| FERTIL CAPACITY | 1x1360 L |
| N° ROWS | 11 --> 8 |
| ROW SPACING |
45/50-->70/75 cm
|
| TOOL BAR | 300/480 cm |
| WEIGHT BASE | 1640 Kg |
| WEIGHT FERTIL | 1640 Kg |
| POWER REQUIRED | 130 hp |
| SEED CAPACITY | 550 L |
| MICRO CAPACITY | 138 L |
| FERTIL CAPACITY | 1x1360 L |
| N° ROWS | 12 --> 8 |
| ROW SPACING |
45/50-->75/80 cm
|
| TOOL BAR | 320/610 cm |
| WEIGHT BASE | 2220 Kg |
| WEIGHT FERTIL | 2440 Kg |
| POWER REQUIRED | 130 hp |
| SEED CAPACITY | 600 L |
| MICRO CAPACITY | 150 L |
| FERTIL CAPACITY | 1x1360 L |
